Concrete Dia Bit Drill (Dry)

Drilling application

Drilling Concrete (Avoid the reinforcing bar),
Mortar,Block, Extruded cement panel, Blick,Pilot hole for roof tile's ancho

Easy and quiet drilling with impact driver etc.

Image of Concrete Dia Bit
Impact driver
Drill

Quiet

Enable to work quietly, by not running operation under vibration and hammering mode.

Easy to use

Easy drilling: Installing to handheld tools (impact driver, etc).

Stable

Less impact avoids cracks. Possilbe to drill at fragile edge part.

Environment clean

The dry drilling operation without using water, maintain the operation site clean. Suitable for reforming operation.

Standard number of cut

  • Concrete: 20 - 50 cut
    Mortar: Aprox 100 cut
    The tool life may varies depending on aggregate amount.

    Standard number of cut

Power unit

  • cordless impact driver
    Electric drill / Percussion drill(rotating mode)

    Image of using a cordless impact driver
    Image of using a vibration driver
Size Total length Effective length Shank size Part
No.
1 piece 3 pieces set
5.5mm 80mm 45mm 6.35mm AC-055 AC3S-055
6.0mm AC-060 AC3S-060
6.4mm AC-064 AC3S-064
7.5mm AC-075 AC3S-075
8.5mm AC-085 AC3S-085
9.5mm 90mm 55mm AC-095 AC3S-095
10.0mm 95mm 60mm AC-100 -
10.5mm 90mm 55mm AC-105 AC3S-105
12.0mm 90mm 55mm AC-120 -
12.5mm 90mm 55mm AC-125 AC3S-125
12.7mm 100mm 65mm AC-127 AC3S-127
14.5mm 90mm 55mm AC-145 AC3S-145
  • The suggested retail price of the listed products may change without an advance notice.
  • The color of the products may look slightly different from the actual color depending on the monitor and/or screen.
  • Specification and appearance of product may change without an advance notice due to improvements.